立式加工中心 VMC713、VMC714、VMC850
项目 | Item | VWC713 | VWC714 | VWC850 |
工作台尺寸mm | Pallet size | 1000x420 | 1000X400 | 1050X500 |
左右行程（X）mm | X axis travel | 600 | 600 | 800 |
前后行程（Y）mm | Y axis travel | 400 | 400 | 500 |
上下行程（Z）mm | Z axis travel | 500 | 500 | 550 |
主轴中心至立柱导轨距离mm | Distance from Spindle center to Columm guide | 427 | 457 | 550 |
主轴端面至工作台面距离mm | Distance from spindle nose to table | 100-600 | 110-610 | 105-665 |
工作台T型槽 | T-type tank | 3-14x100 | 3-14X110 | 3-18X150 |
主轴锥孔 | Type of taper hole | BT40 | BT40 | BT40 |
主轴最高转速tpm | Max spindle speed | 8000 | 8000 | 8000 |
主轴马达功率kw | Spindle power | 3.5/5.5 | 3.7/5.5 | 7.5/11 |
X.Y.Z轴伺服电机kw | Three-axis servo power motor | 1.0/1.0/1.5 | 1.0/1.0/1.5 | 2.0/2.0/2.0 |
X.Y.Z轴电机链接方式 | Three-axis motor coupling | Direct Torque motor | Direct Torque motor | Direct Torque motor |
X.Y.Z轴导轨方式 | Three-axis rail-way | Slide-rail | Slide-rail | Slide-rail |
工作台最大负荷kg | Max.weight on pallet | 400 | 500 | 600 |
换刀速度 pcs | Tool changing time(tool-to-tool) | 1.8 | 4.8 | 1.8 |
选刀方式 | Tool selection mode | The nearesr | The nearesr | The nearesr |
刀库容量 pcs | Tool storage capacity | 16(Carousel) | 16(Carousel) | 24(Turntable) 20(Carousel)is option |
最大刀具重量kg | Max.tool weight | 8 | 8 | 8 |
最大刀具长度mm | Max.tool length | 25 | 250 | 350 |
最大刀具直径mm | Max.tool diameter | Φ90 | Φ90 | Φ100(adjacent knife)/ Φ150(Adjacent no knife) |
XYZ快移速度m/min | Rapid travese rate | 10/10/10 | 10/10/10 | 15/15/12 |
切削进给速度m/min | Cutting feed speed | 8 | 8 | 8 |
XYZ定位精度mm | Positioning precision | ±0.008 ±0.006 ±0.006 | ±0.008 ±0.006 ±0.006 | ±0.008 ±0.006 ±0.006 |
XYZ重复定位精度mm | Repeatability | ±0.004 ±0.004 ±0.004 | ±0.004 ±0.004 ±0.004 | ±0.004 ±0.004 ±0.004 |
机器外形mm | LxWxH | 2600x2200x2650 | 2700X2250X2700 | 2700x2250x2700 |
机器总重kg | Weight | 3000 | 3500 | 5000 |
